To solve the scale problems for the gas water heaters, the pipes and the shower heads, and also to extend the cleaning intervals, save gas and improve operating efficiency.
The condenser and the oil cooling system have problems such as scaling and biological slime. It needs to be cleaned once every 3 months. The normal scale inhibitor dosage is about 200 kg per month. Besides, algaecide needs to be added every year from April to October. The Vulcan descaler save this company 4,733 USD every year!
Shanxi Jinshen Shaping Coal Industry Company, and its main business is coal mining sales.
Before installing the Vulcan electronic hard water mineral descaler, Hyundai Motor Ulsan had mineral scale problems in the pipelines and the induction hardening machine. The factory also had 9 secondary small pipes that had to be manually cleaned every 2-3 months.
Scale was very hard and required 5 people to manually clean the facility while the bathhouse was closed during maintenance. After 1 month the scale became really soft and easy to remove.
The Vulcan descaler was installed to solve the scaling problems of the water heater and to extend cleaning intervals while improving energy efficiencies.
There are 4 heat exchanger systems in the building, which have to be treated. For the business purpose, the hot water supply can not be interrupted. 4 sets of Vulcan S10 were installed to gently clean the heat exchangers and the whole piping system without stopping the machines.
The Vulcan water softener descaler was installed to solve scaling problems inside a boiler connected to the domestic hot water system. Additionally, to also extend cleaning intervals while improving boiler operating efficiency.
Vulcan mineral descaler used to solve the scaling problems for the heating system in the entire community. The heating area is 100,000 square meters.
Before the Vulcan ant-scale solution was installed the factory pipelines were often blocked. This in increased the pressure in the pipe and even made the pipe explode. In the past, the company used salt-based softener to solve the scaling problems, but the result was not satisfactory. 3 Months after installing the Vulcan solution the factory pipes and equipments are still running well without getting blocked.
Page 16 of 28
