Vulcan mineral descaler used to solve the scaling problems for the heating system in the entire community. The heating area is 100,000 square meters.
4 separate units were installs and each provided a strong benefit in a production factory to reduce mineral scaling, improve heat distribution and energy transfer, eliminate water softener tank treatments and help equipment operate better.
Before using Vulcan, it was necessary to clean the scale once a year: it was mainly cleaned with acid, which was not only expensive but also corroded and damaged the pipelines.
Before installing the Vulcan descaler device our factory used a scale inhibitor as the only descaling method; we would have to replace the RO membrane every 1-3 months. Since installing the Vulcan descaler the RO membrane has lasted for 7 months; saving our company 25,000 USD.
The injection molding machine have scaled badly for years, so it was always difficult to clean the pipe, especially the heat exchanger of the mold temperature controller.
We were skeptical about the Vulcan device and doubted its claim to remove mineral scale. After about a 3 month trial using the Vulcan S50, the scale on the equipment has been significantly reduced. This not only saves a lot of water treatment costs but also greatly improved the efficiency of the equipment and our cleaning intervals have been prolonged.
Chrysler saves $15,000 per Machine/Year. Before the Vulcan was installed, there would be a 12 mm calcium buildup in the nozzle by this time and they would exchange it with one that had been acid cleaned.
Vulcan water treatment installed to solve the scaling problem of the plate heat exchanger, to prolong the cleaning time and to improve the heat exchange efficiency.
Page 4 of 4
The Vulcan mineral descaling hard water softening technology has been installed with success across the world:
