Vulcan Electronic mineral descalers solve scaling problems in the cooling towers of a molding factory.
The Vulcan descaler was installed to reduce the limescale in the cooling tower, in the entire pipe circuit and to stop the chemical descaling treatment.
Before Vulcan S100 was installed in hotel’s main hot water line, the storage tanks had a solid 3 cm thick scale layer inside them and the pumping pressure from the booster set was at maximum while being unable to deliver adequate water pressure to the end of the line hotel rooms.
The condenser and the oil cooling system have problems such as scaling and biological slime. It needs to be cleaned once every 3 months. The normal scale inhibitor dosage is about 200 kg per month. Besides, algaecide needs to be added every year from April to October. The Vulcan descaler save this company 4,733 USD every year!
Before installing the Vulcan electronic hard water mineral descaler, Hyundai Motor Ulsan had mineral scale problems in the pipelines and the induction hardening machine. The factory also had 9 secondary small pipes that had to be manually cleaned every 2-3 months.
The Vulcan anti-scale solution was installed to solve serious scaling problems in the power plant's cooling towers
Vulcan S150 device used to solve the scaling problems of the injection molding machine.
Every month the heat exchanger efficiencies dropped dramatically because of an increase in pressure between inlet and outlet of the heat exchanger. Vulcan S250 models were installed and after 5 months there have not been any mineral scale pressure issues in the cooling towers or heat exchangers.
The Vulcan unit installed on the entire building system has also been extremely effective. No more rusty water after weekends and Christmas break. The next Vulcan will be installed on the other school buildings, which are around 20 – 25 years old.
Page 5 of 5
The Vulcan mineral descaling hard water softening technology has been installed with success across the world:
