The condenser and the oil cooling system have problems such as scaling and biological slime. It needs to be cleaned once every 3 months. The normal scale inhibitor dosage is about 200 kg per month. Besides, algaecide needs to be added every year from April to October. The Vulcan descaler save this company 4,733 USD every year!
Before the Vulcan ant-scale solution was installed the factory pipelines were often blocked. This in increased the pressure in the pipe and even made the pipe explode. In the past, the company used salt-based softener to solve the scaling problems, but the result was not satisfactory. 3 Months after installing the Vulcan solution the factory pipes and equipments are still running well without getting blocked.
The Vulcan device has guaranteed a longer service life of the thermal alternator and the cooling circuit pipes due to the non-accumulation of lime.
After 6 months of installation, the factory data center platform showed that the heat exchanger temperature still did not rise, so it can be determined that there is no new scale.
After 1 year with the Vulcan descaler, the condenser approach temperature of the chiller has been reduced and there is no need to clean the condenser tubes every 6 months.
Vulcan used to solve the scaling problems in the circulating water systems of the sterilizer and the reheater.
The Penoles industry is a metallurgy mining company in Mexico. The Vulcan mineral descaler is used to remove huge concentrations of mineral scale in their mining operations: 70 gr/l – 70,000 Mg/ L – 4,090 GPG
Page 7 of 7
The Vulcan mineral descaling hard water softening technology has been installed with success across the world:
